Search by Product
- Asphalt Emulsions
- Modified Asphalts
- Landscape Materials
- Cement Concrete Materials
- Crack Repairing Materials
- Mixtures for Pavement
- Pavement Supplementary Materials
REKIPHALT SUPER is a polymer modified asphalt type III-W with an outstanding resistance to stripping and workability which is used in bridge surface paving (dense grade compounds and SMA compounds). Because the minimum compacting temperature is lower by around 30°C compared to compounds that use normal polymer modified asphalt type III-W, a long compaction work time can be secured even at times when the asphalt compound temperatures tend to become lower, such as during winter and at night.
SINOPHALT M is polymer modified asphalt type III-WF that is used in steel deck plate dense grade asphalt paving and stone mastic asphalt (SMA) paving. Because steel deck plate paving will greatly deform due to traffic loading, cracks in the paving will easily occur. SINOPHALT M enhances the resistance regarding cracking to improve the durability of steel deck plate paving..
TOUGHPHALT SUPER M is a polymer modified asphalt that is used for porous asphalt paving (high function paving) on bridge with steel deck plates. Has outstanding flexibility and fatigue resistance, and has a high ability to conform to the deformation of the bridge with steel deck plates.
TOUGHPHALT SUPER R is a polymer modified asphalt that is used for porous asphalt paving (high function paving) in locations that are subject to the influence of turning the steering wheel from side to side when starting and stopping moving vehicles at intersections, and the twisting actions caused by turning left and right. In the types of locations described above, the aggregate will be easily scattered from the surface of the porous asphalt paving, which may in some situations reduce the running ability and safety.
CHEMIPHALT MX is a type of polymer modified asphalt that helps to extend the life of porous asphalt paving. This product offers higher durability at high and low temperatures than our high-durability polymer modified asphalt type H and can be used in porous asphalt paving that features high porosity and small particle sizes. Chemiphalt MX offers a superior surface to conventional polymer modified asphalt type H, with better permanent deformation resistance and higher torsional and low-temperature aggregate scattering resistance.
CHEMIPHALT SV is a type of polymer modified asphalt specially designed for aggregate scattering resistance and use in porous asphalt paving (drainage pavement, high-performance pavement) in cold, snowy regions. Remaining flexible even in environments where temperatures fall below -30°C, this product has a low-temperature Cantabro loss rate (test temperature: -20°C) one half that of polymer modified asphalt type H-F, which has been typically used for porous asphalt mixtures in cold, snowy regions. As a result, the product is highly resistant to damage specific to cold regions, such as aggregate scattering when impacted by tire chains.